FCL Intumescent Tape - Black
Please login or request a trade account to view prices.
FCL Intumescent Tape - Black
Colour: Black
Tecnofire® intumescents are available in a wide range of thicknesses and with various expansion volume and pressure characteristics. The Tecnofire® range includes both flexible and rigid products. Tecnofire® intumescents can be supplied in sheets to customers required dimensions, in large rolls, in narrow coils slit to required width or die cut to any required shape.
All grades of Tecnofire® can be supplied with self adhesive backing. Self adhesive backing is a two stage process. The surface of the Tecnofire® is sealed with a primer then self adhesive coating and release paper is applied. This results in a self adhesive
backing with high tack and minimises the risk of product delamination during use.
The surface of flexible grades of Tecnofire® can be coated to improve abrasion resistanceand appearance. The standard
coating used is black but other colours are possible
Smoke Emission
Products have been tested to BS6853: 1987 Appendix B. Clause B5.1 - Fire Precautions in the Design and Construction of Railway Passenger Rolling Stock, Three Metre Cube Smoke Emission Test. The recommended compliance criterion for Category
1 material (described as ‘Rubber/Plastics: solid, or flexible cellular’) is an Ao value of less than 0.02. The products tested meet this criterion.
Smoke Toxicity
Tecnofire® intumescents are formulated to minimise the generation of toxic fumes under fire conditions. Various grades have been tested to recognised standards and reports are available. Test results include: DIN 53436. Analysis of gases resulting from combustion at 600oC. The total yield of carbon monoxide produced by the products tested was in the range 19.09mg/g to 20.19mg/g. Cyanide, nitrate, sulphate, fluoride, chloride and bromide ions were all below detectable limits. Naval Engineering Standard 713: Issue 3 - Determination of the Toxicity Index of the Products of Combustion from Small Specimens of Materials. Typical toxicity index 1.21. London Underground Ltd Engineering standard E1042: A2: March 1998. Quantitative analysis results for carbon, aluminium, silicon, sulphur, calcium, titanium, iron and chromium are available.
Surface Spread of Flame and Fire Propogation
Test results to BS476 Part 6 and Part 7 are available for certain Tecnofire® products on request.
Product Stability
With the exception of Tecnofire® 2000, Tecnofire® intumescents have not been designed for full external exposure conditions and cannot be guaranteed for use in such situations. However, all Tecnofire® intumescent products have considerable tolerance to damp conditions and occasional water immersion such as might occur from condensation, leaking pipes, floods or similar events in a building. Tests have shown that, after water immersion, Tecnofire® intumescents will dry out and give the same level of performance as the original sample. Further details of resistance to water and chemicals for various Tecnofire products are available on request. Tecnofire® 2000 is impregnated with a thermoset epoxide resin which results in a hard, durable and vandal resistant surface. The product has a high degree of water and chemical resistance.
FCL Intumescent Tape - Black
Colour: Black
Tecnofire® intumescents are available in a wide range of thicknesses and with various expansion volume and pressure characteristics. The Tecnofire® range includes both flexible and rigid products. Tecnofire® intumescents can be supplied in sheets to customers required dimensions, in large rolls, in narrow coils slit to required width or die cut to any required shape.
All grades of Tecnofire® can be supplied with self adhesive backing. Self adhesive backing is a two stage process. The surface of the Tecnofire® is sealed with a primer then self adhesive coating and release paper is applied. This results in a self adhesive
backing with high tack and minimises the risk of product delamination during use.
The surface of flexible grades of Tecnofire® can be coated to improve abrasion resistanceand appearance. The standard
coating used is black but other colours are possible
Smoke Emission
Products have been tested to BS6853: 1987 Appendix B. Clause B5.1 - Fire Precautions in the Design and Construction of Railway Passenger Rolling Stock, Three Metre Cube Smoke Emission Test. The recommended compliance criterion for Category
1 material (described as ‘Rubber/Plastics: solid, or flexible cellular’) is an Ao value of less than 0.02. The products tested meet this criterion.
Smoke Toxicity
Tecnofire® intumescents are formulated to minimise the generation of toxic fumes under fire conditions. Various grades have been tested to recognised standards and reports are available. Test results include: DIN 53436. Analysis of gases resulting from combustion at 600oC. The total yield of carbon monoxide produced by the products tested was in the range 19.09mg/g to 20.19mg/g. Cyanide, nitrate, sulphate, fluoride, chloride and bromide ions were all below detectable limits. Naval Engineering Standard 713: Issue 3 - Determination of the Toxicity Index of the Products of Combustion from Small Specimens of Materials. Typical toxicity index 1.21. London Underground Ltd Engineering standard E1042: A2: March 1998. Quantitative analysis results for carbon, aluminium, silicon, sulphur, calcium, titanium, iron and chromium are available.
Surface Spread of Flame and Fire Propogation
Test results to BS476 Part 6 and Part 7 are available for certain Tecnofire® products on request.
Product Stability
With the exception of Tecnofire® 2000, Tecnofire® intumescents have not been designed for full external exposure conditions and cannot be guaranteed for use in such situations. However, all Tecnofire® intumescent products have considerable tolerance to damp conditions and occasional water immersion such as might occur from condensation, leaking pipes, floods or similar events in a building. Tests have shown that, after water immersion, Tecnofire® intumescents will dry out and give the same level of performance as the original sample. Further details of resistance to water and chemicals for various Tecnofire products are available on request. Tecnofire® 2000 is impregnated with a thermoset epoxide resin which results in a hard, durable and vandal resistant surface. The product has a high degree of water and chemical resistance.
Manufacture | Fire Protect |
---|---|
MPN | FCLBT |
Best Seller | No |
Recently Added | No |
Delivery & Returns
Returns
If you wish to initiate a product return within 14 days, we gladly offer a refund as long as the item is returned in its original condition, including all packaging, tags, labels, and accessories. Kindly complete the provided return form and include it in the package you are sending back.
Please be aware that orders exceeding £100 excluding VAT are subject to a non-negotiable 40% restocking fee.
Ensure that you diligently fill out all the necessary fields on the Returns Form. It is particularly crucial to provide your customer details and order number to facilitate a prompt processing of your return; failure to include this information may result in delays in refund processing.
Delivery & Returns
Delivery Information - What does your delivery option mean?
All deliveries are subject to stock and availability.
UK Mainland
**Next Day Cut Off – subject to cleared payments and passing of payment security checks by 12pm.
Orders processed after 12pm using the next-day service option cannot be guaranteed.
All UK Mainland orders qualify for FREE when you spend £50 ex vat or more*. *Please note certain items do not qualify for free delivery.
Consignments will be delivered using DPD, Evri, and Shipley, or direct from the supplier if stock is not readily available within our warehouse.
Please note that orders placed on a Friday after 12pm for next day delivery will be dispatched on the following Monday for delivery on Tuesday.
Orders placed prior to a Bank Holiday will be delivered two days after the Bank Holiday.
Delivery Options - B2C |
Price (ex vat) |
Timing |
FREE Standard Delivery when you spend £50 ex vat or more |
£0.00 |
Monday - Friday, excluding public holidays. |
Standard Delivery (2-5 working days) |
£2.99 |
Monday - Friday, excluding public holidays. |
Express Delivery (1-3 Working Days) |
£19.99 |
Monday - Friday, excluding public holidays. |
|
|
|
|
|
|
|
|
|
|
|
|
Unfortunately, We Cannot Guarantee Next Working Day - you will be notified if we can't fulfill this.
Certain items do not qualify for free delivery - this will be automatically applied at the checkout
Large heavy items may be subject to pallet charges - you will be notified by our customer care team.
Outside UK Mainland (Including Ireland)
*Please note the following postcodes are classed as Non-Mainland UK or Remote / Rural delivery: AB, IV, KW, PA, PH, HS, KA, ZE, PO30-PO41, IM, JE, GY, BT, TR21-TR25.
Regardless of the order weight and quantity, the following locations incur a carriage charge of £24.99 INC VAT
Delivery Options - B2B |
|
Timing |
FREE Delivery on any B2B order |
£0.00 |
Monday - Friday, excluding public holidays. |
|
|
|
Next working day delivery cut off is 1pm.
We will always try and accommodate next day delivery where we can but to guarantee next day delivery, any PO must be with Dortech before 1pm.
If you require a next day delivery but order after 1pm, a premium delivery option can be organsied through the trade sales team.
However, there is no guarantee this order will arrive the next working day. Does not apply to pallet orders.
We will deliver into branch or direct to any customer office/site address.
Europe
It is advised you arrange your own courier collection from our warehouse. If you require assistance Dortech Direct can schedule a delivery for you. Prices are dependent on box quantity and order weight. Please call our sales team for a quotation on 0330 1281212.
Please Note
- All available delivery options will be displayed at checkout/basket pages
- Working days do not include Weekends or Bank holidays
- For all enquiries ring 0330 1281212 / [email protected]
BACS & Purchase Orders
- The delivery times & dates are only valid from receipt of funds or valid PO number
Damages
By ordering with Dortech Direct you agree to inspect goods upon delivery. Damaged goods should be rejected. If you notice damage after the goods are delivered, you must report this to us within 48 hours of delivery. Dortech Direct does not accept damage liability for issues reported over 2 working days from the point of delivery.
You can report damage by sending your order details and images of any issues to [email protected]
Returns
If you need to return a product within 14 days, we are happy to refund the product provided it is returned, as sold, with all the original packaging, tags, labels and accessories.
Prior to returning any goods for any reason, please fill in the Returns Form and put it in the package that you are returning. Please note some orders are subject to up to a 35% restocking fee. This charge represents the administrative time and overheads to reprocess the stock.